Butterfly holes Upright Heavy Duty warehouse Storage Adjustable Rack Steel slide pallet rack rolling

  Butterfly holes Upright Heavy Duty warehouse
Storage Adjustable Rack Steel slide pallet rack rolling machine
Butterfly holes Upright Heavy Duty warehouse Storage Adjustable Rack Steel slide pallet rack rolling machine we designed with the following features:
1. Feeding guide mechanism: ensure the feed is stable and does not run off.
2. The base part is the main part of the rolling mill. It is welded by square tube and is covered with 20mm thick steel plate. The surface of the steel plate is processed by a milling machine to support the archway, ensuring that the bottom of the archway is stable, firm and beautiful.
3. Rolling: The key part of the molding machine consists of the main shaft, the archway, the rolls, the bearings and other components.
Spindle diameter: φ46mm Spindle material: 45#, quenching and tempering treatment
Roll material is Cr12, quenching hardness HRC58-65°
Roll processing technology: roughing - heat treatment - inner hole grinding - finishing
4. Transmission system (gear transmission): a reducer outputs power to the forming unit and transmits it to each spindle through the gear.

The finished products of Butterfly holes Upright Heavy Duty warehouse Storage Adjustable Rack Steel slide pallet rack:

Butterfly holes Upright Heavy Duty warehouse Storage Adjustable Rack Steel slide pallet rack rolling machine we design like the following pictures:

Production process: discharging rack...opening machine...punching...servo feeding...rolling forming part...hydraulic cutting (or bending at the same time)

Other elements of Butterfly holes Upright Heavy Duty warehouse Storage Adjustable Rack Steel slide pallet rack rolling machine:

Main process parameters of the Butterfly holes Upright Heavy Duty warehouse Storage Adjustable Rack Steel slide pallet rack rolling machine:
1. Rolling thickness: 0.6-1.0 mm, using strip coil material.
2, working speed: 0~6m/min
3, unit power: 7.5kw (power) hydraulic pump station 11kw with accumulator +5.5kw
4, the total power of the whole machine: 25kw
5, the number of forming groups: about 16 groups
6, length accuracy: less than 1 meter: ± 0.5mm
7, material width about: 128mm
Third, the main components of the production line
Servo feed punching system of the production line.
1. Punching mechanism: One punching die frame is configured according to different profiles. The maximum feed width is 200mm.
2. Servo feeder: Xinjie servo motor 2.3kw, feeding speed 16-30m/min, pinch roller high frequency processing hard chrome plating

Here are some installation pictures for your reference: