roller shutter slat forming machine
This roller shutter slat forming machine can both produce rolling shutter slats with or without holes. The punching part is separated from the main Roll Forming Machine.when you don't need holes, just remove the punching part.
This profile drawing is popualr in Asia.The holes can let wind and light through.
Specifications of roller shutter slat forming machine
a. Coil inner diameter: 450-550mm
b. Coil max width: 300mm
c. Max carrying capacity: 3T
a.Material of mold: Gcr12MoV quenched
c.Punch speed:4m/min(high speed)
It is a independent machine to punch the holes, you can remove this part when you don't need the holes.
you can choose different pressure and speed, more bigger more expensive,more faster more expensive.
Roll forming machine
a. Number of forming steps: 12 stations
b. Shaft material: Gcr12MoV quenched
c. Roller material: Gcr12MoV quenched
d. Transport: by gear
e. Forming speed: 15-20m/min (normal speed)
a.The material of blade: Cr12Mov,Hardening HRC 58-62℃
C. Power supply: Hydraulic station
a. Hydraulic motor Power:3kw
b.Hydraulic oil: 46#
c.Hydraulic pressure : 12Mpa
PLC control system, we will take Delta .
You can set the cutting length in the PLC.
1.How to get a quotation of shutter strip machine?
1. Normally we give the accurate quotation based on the drawing profile, so if you want to get the accurate quotation, please show us the drawing profile first.
2.Machine could be designed in many type and methods, for the machine frame, PLC brand, motor brand all will effect the price.
2. Terms of payment:
30% T/T, Balance to be paid before shipping after inspection.Also we accept the payment L/C, O/A , D/P.
Product Categories : Roller Shutter Door Forming Machine