Metal Floor Deck Sheet Panel Roll Forming Machine
The Metal Floor Deck Sheet Panel Roll Forming Machine adopts wallboard structure.It increases the strength of the machine.The finished product of this metal deck is widely used in floor flat.After making embossing on the steel,it increase the strength between the steel and concrete, thereby increasing the fastness of the floor.
Steel floor sheets of the Metal Floor Deck Sheet Panel Roll Forming Machine are new building materials with various thicknesses. They are used as the floors of buildings because of low cost, light weight but high strength, short building period, and re-cycle use.
Drawings profile or finished product pictures
Specification of Metal Floor Deck Sheet Panel Roll Forming Machine
Sheet length:Any length
Working Speed:12-15 m/min (10 piece per min as 8 feet per piece,standard machine)
Control System:Mitsubishi/Siemens PLC& transducer(customized)
Total Power:About 15KW
Total Weight:About 14T(up to the final design)
Production process of Metal Floor Deck Sheet Panel Roll Forming Machine
Uncoiling→Feeding material into machine→Roll forming→Measuring length→Step formed→ Auto cutting→Products receiving
Un-coiler System of Metal Floor Deck Sheet Panel Roll Forming Machine
Usage: It is used to support the steel coil and uncoil it in a turntable way..Passive uncoil pulled by roll forming system
Usage:Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate panel.
Main Roll forming machine
Usage :In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission, roller was chromed which can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Frame : 350 H steel
Drive mode: chain
Material of rollers:45# steel, surface hard chromium plating.
Length of the main part:14200*1300*1400mm
Roller fixer : middle plate
Material of shafts: 45#steel
Diameter of shafts: φ80mm
Number of rollers : 30 rollers
Usage :It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Feature : Ensure stability, precision and cutting speed
Function: Automatic cutting controlled by PLC.
Material of blades: Cr12 quenched
Power supply : hydraulic power
Products receiving tables
Product Categories : Floor Deck Roll Forming Machine